bent hr-16 testing
Heres a link to video.. really crabby  quality since using a mobile phone to make videos :(

upgraded user manual for 

olegtron/skatronix yuv bending distributor

user manual for OLEGTRON/SKATRONIX yuv bending distributor

nice and simple

olegtron/skatronix yuv bending distributor is made for easy bending purposes of alesis hr-16 drummachine.

it has been designed so that original design of alesis has not been afflicted. two animals olegtron and 

skatronix were used to test this machine. nobody died.

Olegtron and i (Skatronix) got hold of an old Alesis HR-16 drummachine. According to articles in web it was supposed to be an easy one to bend. 


We found nice and simple tutorial  (  bending hr-16 ) and read it thru couple of times. First taking the bottom lid away with 4 screws and looking inside for the bottom board. Taking the another set of screws away and then locate the two rows of bending points.These bending points were found next to backpanel jacks..
Look for two rows of horizontally aligned ICs...

first 5 points soldered

On the tutorial it said that it wasnt necessary to make 
connections on 2 x 2 rows, so we choose lower row for 
bending points. 26 points to solder. For wiring we choose IDE cable for this project. 

All 26 connections now soldered. 






The YUV BENDING DISTRIBUTOR


Olegron found some very nice patching distributor 
from a flee market out of town.
We got a punch of them now for next summer projects. 

5 x 13 RCA-jacks all together on one panel.




Olegtron shredded couple of resistors and condensators 
away from the board and made the horizontal patchbay 
rows, 13 rows, 3 connection points each..

Down you can see the IDE cables other 
end connected to "bending points"...




Almost done! 
Closing the lids and making connection points in the middle of that IDE cable to have 2 separate machines. 

The original Alesis can be used as before but by connecting the Olegtron/Skatronix YUV bending distribution unit you can produce new sounds, distortions, flams, rolls and such.

As we tested it all MIDI sent to the HR-16 was coming nicely so this bend aplied only to sounds of the drummachine. All effects are aplied to all pads on hr-16.


Happy bending!